Surfworx Foamie Setup & Care Guide

← Surfworx Buying Guides

Bob Gnarly Surf & Skate / Sunderland

Surfworx Foamie Setup & Care Guide

Check the exact fittings before you buy extras, then look after the board between sessions.

Identify the fin fitting

Start with the supplied fins

Check the product listing and the base of the fins you receive. Use the maker’s fitting instructions. Keep the original hardware together and check each fin is seated before going in.

Buying replacements

Some Banshee and Ribeye stock listings specify original two-tab FCS-compatible fittings. Other softboards use a different system. Check the exact listing and fin base with our fin-box identification guide. If you’re unsure, send us a photo of the fin and box.

Set up for your first session

  1. Check the board, fin fittings, leash plug and leash for damage. Use the supplied instructions and ask the shop if any hardware is missing or doesn’t fit.
  2. Check the deck advice for the exact board. If it calls for wax, choose the appropriate temperature grade and apply it where your feet go.
  3. Choose conditions you can handle, wear a suitable leash, surf with a mate and check beach guidance before going in.

Read the surf wax guide · RNLI surfing safety guidance

After the session

Rinse off salt and sand with fresh water and let the board dry out of direct sun before bagging it. Avoid leaving it in a hot vehicle. Use a bag that fits for transport, and check the deck, rails and fittings after knocks.

For splits, loose fittings or repairs, start with the maker’s advice or ask the shop. Match any repair product to the board’s construction.

Keep exploring

Shop Surfworx · Browse starter packages · Ask the Sunderland shop