Refined for tighter curves
The wide point sits slightly forward of centre, while the nose is kept down and the tail is slightly pulled in to help the board fit into a tighter curve.
Pyzel Ghost Surfboard
PYZEL SURFBOARDS · HIGH PERFORMANCE
The Ghost
A high-performance board built to combine sensitivity, control and speed across a wide range of good waves.
High Performance 2–12FT Thruster · Quad · 5-Fin
The Ghost
A high-performance design built for sensitivity, control and speed.
The Ghost is a high-performance board that Pyzel says works well for all levels of surfer and can be considered a one-board quiver for trips where decent to good waves are on the menu. It has become one of John John Florence's favourites for a wide range of surf.
Originally designed for performance in hollower, more powerful waves, the Ghost has also proven itself in reef breaks, dumpy beachies and point waves.
Based off Pyzel's Short Cut, the Ghost has a more refined outline, with the wide point pushed slightly forward of centre, the nose area kept down and the tail slightly pulled in to help the board fit into a tighter curve.
Wave Range 2–12FT
Pyzel lists the Ghost for a broad range of waves, from 2ft through 12ft.
Rocker Medium
Medium/low through the front half, with plenty of rear rocker curve for turning control.
Bottom Single → Double → Vee
Single concave runs through the bottom with double concave set inside.
Fin Setup Thruster · Quad · 5-Fin
Pyzel lists all three fin configurations for the Ghost.
“
A refined high-performance shape that balances sensitivity and control with the speed needed to make the most of good waves.
Bob Gnarly The Ghost · Editorial Take
What makes it work
Speed and hold. Sensitivity and control.
The Ghost's combination of refined outline, forward-pushed thickness, rocker and concave is designed to get the board moving quickly while maintaining control through turns and at speed.
Volume pushed forward
Pyzel pushes the thickness forward to help the Ghost get into waves more easily, while keeping the tail and rails thinner for hold through barrels and turns at speed.
Speed with rail-to-rail response
Single concave runs through the entire bottom with double concave set inside, creating speed and lift while allowing quick rail-to-rail transitions.
The Shape
Refined from the Short Cut, built for high performance.
Pyzel based the Ghost on the Short Cut but refined the outline for a tighter, more performance-oriented curve. The wide point remains slightly forward of centre, while the nose area is kept down and the tail pulled in slightly.
The thickness is pushed forward to help with getting into waves, while the tail and rails remain thinner to provide hold through barrels and turns at speed.
Outline Refined Short Cut outline with wide point slightly forward of centre
Rocker Medium / medium-low front half with plenty of rear rocker curve
Bottom Single with Double to Vee
Rails Medium / Standard
Tail Refined, slightly pulled-in tail
Why the Ghost?
High-performance handling with a healthy mix of sensitivity and control.
The Ghost was originally designed for hollower, more powerful waves, but Pyzel says its versatility has seen it work across reef breaks, dumpy beachies and point waves as well.
The combination of the rocker and concave is central to the design. The front half is relatively low to help the board get into waves and pick up speed, while the rear rocker provides turning control and snappy responsiveness.
Who is the Ghost for?
A high-performance board for decent to good waves.
2–12ft
Pyzel lists the Ghost across a broad 2–12ft range, with the design originally intended for hollower, more powerful surf.
From your height upwards
Depending on the waves you want to ride it in, Pyzel recommends ordering your Ghost from your height to 8 inches over.
A little more board
Pyzel recommends around ¼–½ inch wider and ⅛–⅜ inch thicker than your everyday shortboard.
Sizing
Ghost dimensions.
These are the current standard Ghost dimensions published on Pyzel's Ghost model page. The separate XL and Pro dimension sets are not included here.
| Size | Width | Thickness | Volume |
|---|---|---|---|
| 5'8" | 18.75" | 2.31" | 24.7L |
| 5'9" | 18.88" | 2.38" | 26L |
| 5'10" | 19" | 2.44" | 27.2L |
| 5'11" | 19.13" | 2.5" | 28.4L |
| 6'0" | 19.38" | 2.56" | 29.9L |
| 6'1" | 19.5" | 2.63" | 31.3L |
| 6'2" | 19.63" | 2.69" | 32.7L |
| 6'3" | 19.88" | 2.75" | 34.3L |
| 6'4" | 20" | 2.88" | 36.6L |
| 6'5" | 20.25" | 3" | 39.15L |
| 6'6" | 20.5" | 3" | 40.1L |
| 6'8" | 20.75" | 3.06" | 42.5L |
| 6'9" | 20.75" | 3.13" | 44L |
| 6'10" | 20.88" | 3.13" | 44.7L |
| 7'0" | 21" | 3.19" | 47.1L |
Inside the Ghost
See the Ghost in action.
The Ghost · Pyzel
The Ghost in action, as featured on Pyzel's own model page.
The Ghost · Pyzel
A second look at the Ghost, taken directly from the Pyzel model page.
Two useful tools
Know your volume. Then build your Ghost.
Find your guide volume.
Start with a guide volume, then use Pyzel's Ghost sizing advice alongside your normal shortboard dimensions to establish a useful starting point.
Find My Volume →Build your Ghost.
Take your guide volume into the Bob Gnarly Pyzel Board Builder and explore the available Ghost options.
Open Board Builder →Bob's Take
A genuine high-performance design with a remarkably broad brief.
The Ghost has a clear performance focus, but Pyzel's own description makes it clear that the board is not restricted to one type of wave or one level of surfer. It has been used across reef breaks, beach breaks and point waves, with a wave range extending from 2ft to 12ft.
The design details explain why. The front rocker is kept medium/low to help the board get into waves and pick up speed, while the rear has enough curve to give turning control and a snappy response.
Underneath, the single concave and double concave combination creates speed and lift both on a rail and across flatter sections, while allowing quick rail-to-rail transitions.
For sizing, we'd start with your normal shortboard dimensions and then work from Pyzel's own recommendation: anywhere from your height to 8 inches over, around ¼–½ inch wider and ⅛–⅜ inch thicker depending on the conditions you want the Ghost for.
Ready to build?
Build your Ghost.
Start with your guide volume, then head into the Bob Gnarly Pyzel Board Builder and build the Ghost around the dimensions and setup you're looking for.
BOB GNARLY SURF
Find Your Ideal Surfboard Volume
Tell us a little about yourself and how you surf. We'll give you a recommended volume range to help you find your first or next board.
Use this calculator as a rough guide only. Volume isn't everything. If you're unsure, hit the 'Live Chat' below and we can help.
01
How much do you weigh?
02
How would you describe your surfing?
Choose the description that sounds most like your surfing today.
03
How would you describe your fitness?
This helps us account for paddle power and how much support you may want from your board.
04
What kind of waves do you surf most often?
Think about the conditions you're most likely to encounter.
YOUR RECOMMENDED VOLUME
--
L
--
BOARDS TO CONSIDER
Boards close to your volume
We've matched your result against the surfboards in our Volume Calculator collection.