Captain Fin Co Fin Fit & Size Guide

Captain Fin Co · Bob Gnarly Surf
Captain Fin Co Fin Fit & Size Guide
Match Single Tab, Twin Tab and Snap-In to your fin boxes, then narrow the size by board, rider and the feel you want.
Check the base before your size
Look at the fitting shown in the specific product listing. Futures uses one long tab, whereas traditional FCS dual tab uses two short tabs. Captain Fin’s Snap-In is sold as the fitting for FCS II. If using an older dual-tab fin in FCS II, follow the box maker’s compatible screw and infill guidance.
A longboard centre uses its own adjustable box and hardware. Centre and side fittings are independent on a 2+1. Never force a fin into a box that offers unexpected resistance.
Size by the feel you want
Start with the maker’s size recommendation and the fin that works in your board. For shortboard sets, a larger size usually gives more surface area. How readily you can turn the board also depends on your pressure through the tail, tail area and fin rake.
A single-fin height is one dimension. A narrow 10″ flex fin can have less area than a shorter wide-tipped pivot. Match the outline before you use an inch number as a shortcut.
Set one reference session
Write down your current setup and the sort of waves where it feels best. Change the size or template first. If using an adjustable single fin, try small box-position changes on another session so the differences are easier to read.
Compare the templates
| Listing term | What to confirm | Example |
|---|---|---|
| Futures / Single Tab | One long tab and a matching Futures box. | CF Series Tri · Futures |
| FCS / Twin Tab | Two traditional tabs and the correct securing hardware for the plugs. | CF Series Tri · FCS |
| Snap-In / FCS II | The listing explicitly names Snap-In or FCS II. | CF Series Tri · Snap-In |
| Longboard centre | Longboard centre box with hardware appropriate for the fin. | CF Slasher Centre |
| Side bites | Actual side fitting on a 2+1, independent of centre box. | Josh Hall Futures Side Bites |
Fins to compare in the shop
Check the product page for the exact fitting and available sizes or colours.
Questions shoppers ask
I only have a photo of my board. Can I check the fitting?
Take a clear photo of the empty boxes and a side-on photo of any old fin base. Include the board model and send both to the shop.
Do I choose the same size across different fin brands?
Compare the actual area and dimensions. Both sets can say Medium and still put a different amount of fin in the water.
Keep exploring
Captain Fin Co buying guide
Compare setups and start with your board.
Longboard fins and noseriding
Compare pivot, balanced and swept templates for classic logging. Use the board’s tail, your time on the nose and how hard you turn off the back to narrow the choice.
Mid-length singles and 2+1
Choose a centre fin for an egg, mid-length or performance longboard, then decide whether the board calls for a single or a centre with side bites.
Twins, keels and trailers
Choose between a keel fish setup, a more mobile performance twin and a twin plus trailer with a little extra control.
Thrusters, quads and five-fin packs
Compare everyday and signature shortboard templates, then decide when a five-fin pack or a dedicated quad makes sense.
Surfboard Fins Buying Guide · Single fins and 2+1 basics · Ask the shop



