Pyzel Surfboard Size & Volume Guide

← Pyzel Buying Guides

Bob Gnarly Surf & Skate / Pyzel

Pyzel Surfboard Size & Volume Guide

Find a sensible volume range, then compare the outline, width and thickness that carry it.

Start with the board you already know

  1. Write down your current board’s model, length, width, thickness and volume. Note whether you miss waves through lack of paddle support or feel you have too much board on rail.
  2. Use the Bob Gnarly surfboard volume calculator for a starting range. Compare it with what you’ve actually ridden in similar waves.
  3. Pick your model family, then compare two adjacent sizes and the stock XL if there is one. Think about how the extra width, thickness and foam distribution will feel underfoot.

Same length. Standard vs XL.

Models at 6′0″ Standard width × thickness · volume XL width × thickness · volume
Gremlin / Gremlin XL 20 3/4" × 2 5/8" · 36.6 L 21" × 2 3/4" · 38.3 L
Pyzalien 2 / Pyzalien 2 XL 19 1/2" × 2 1/2" · 31.5 L 20 1/8" × 2 5/8" · 34.1 L
Phantom / Phantom XL 20" × 2 9/16" · 32.6 L 20.25" × 2.69" · 34.7 L
Red Tiger / Red Tiger XL 19 1/2" × 2 1/2" · 31.3 L 19 3/4" × 2 5/8" · 33.2 L
The Ghost / Ghost XL 19 3/8" × 2 9/16" · 29.9 L 19 5/8" × 2 5/8" · 31.1 L

Figures are from the stock size rows in our Pyzel builder. Width and thickness are shown as the builder lists them. Use the exact model and construction selection to check the current spec before ordering.

Why two boards with similar litres can surf differently

Where the foam sits

More foam under the chest can support paddling. A wider tail can change lift and feel through soft sections. Rails and foil influence how much board you feel through the turn.

Match the board to its job

A daily driver, a groveller and a step-up may need different dimensions for the same rider. Use your main board as a reference, then consider the take-off and wave face the next one is for.

Between two sizes?

Compare both sizes in the builder. If you’re already missing waves and struggling to get in early, be cautious about dropping both length and volume at once. If your current board holds its speed but feels bulky in turns, look at outline and rails as well as total litres.

Compare sizes side by side

Open a model, pick a size and open the builder’s Board Comparison. Where that model is supported by the comparison tool, it starts with the other board’s closest listed stock volume. Change the comparison size to see what happens to length, width and thickness.

Keep exploring