Flying Diamonds CJ Nelson Fin Guide

Flying Diamonds · Bob Gnarly Surf

Flying Diamonds CJ Nelson Fin Guide

Compare the Cali Pivot, Classic Pivot, Noserider, Involvement, Parallax and Power Flex for different ways of riding a log.

Separate CJ’s three hold-focused templates

The Cali Pivot is the most direct starting point here for someone who wants a big fin and an anchored feel in the pocket. The Noserider uses a filled-out tip for hold while keeping an upright stance for adjustments. The Classic Pivot adds a little rake and rounds the tip to give more of a turning arc.

The choice comes down to what happens just after you step back from the nose. If you want the board to reset in the pocket quickly, compare the upright templates. If you link a more rolling cutback, start with the Classic Pivot.

Where Involvement, Parallax and Power Flex fit

The Involvement is the balanced everyday choice, with a moderate amount of flex and enough base for drive. The Parallax G10 uses reduced area and a speed-oriented foil. Compare it when your focus shifts toward rail-to-rail surfing.

The Power Flex is another tail-focused option. Its design keeps flex in check so you can load it and link turns without giving up too much drive. CJ’s Performance Centre belongs in the 2+1 comparison, where it shares the load with side bites.

Compare the templates

Template Sizes listed Where it fits
Cali Pivot 10″ / 10.5″ / 11″ Hold-first log and slow pocket trim.
Noserider 9.5″ / 10″ / 10.5″ Upright profile and full tip for stability while forward.
Classic Pivot 9.5″ / 10″ / 10.5″ Pivot hold with a bit more sweep and turn.
Involvement 9″ / 9.5″ / 10″ / 10.5″ Balanced everyday logging.
Parallax G10 9.5″ / 10″ / 10.5″ Less area for faster rail changes and more tail freedom.
Power Flex 9.5″ / 10″ / 10.5″ Tail surfing and connected turns with controlled flex.

Fins to compare in the shop

CJ Cali Pivot

CJ Cali Pivot

Compare against your current fin if pocket hold is the priority.

CJ Involvement

CJ Involvement

The everyday yardstick between full pivots and speedier shapes.

CJ Parallax G10

CJ Parallax G10

A lower-area option for rail-to-rail turns.

Check the product page for the exact fitting and available sizes or colours.

Questions shoppers ask

Which CJ fin should I look at for my first noserider?

Start with Classic Pivot if you want a mix of turning and hold. Compare Cali Pivot or Noserider if your board is designed for time on the nose and you want a more anchored tail.

Is a 10″ Parallax the same amount of fin as a 10″ Noserider?

They share a height. The Parallax carries less area and has a different outline and foil, so it can feel much freer on the same board.

Keep exploring

Flying Diamonds buying guide

Compare setups and start with your board.

Bing pivots, flex and speed fins

Find your way through the six Bing templates. Compare the Pivot and Trim Pivot for logging, Drive and Speed for carving lines, and Flex and Mid-Single for smaller boards.

Kai Sallas and Hawaiian logging

Compare the Spiral, Kani Stewart and Kelis Kaleopaʻa for logs, and the HP centre and sides for performance longboards.

Taylor Jensen and performance 2+1

Build a performance longboard 2+1 around a centre and a matched pair of side bites, or choose a Taylor Jensen template to surf as a single.

Skindog, Neal Purchase Jr and Sea Monnster

Compare Ben Skinner’s SUB and twin pair, Neal Purchase Jr’s mid-length single and Apex twin, and Josh Seemann’s two Sea Monnster noseriding templates.

Single-fin sizing and box position

Compare height, area, rake and flex together, then use small centre-box adjustments to tune how your longboard or mid-length feels.

Surfboard Fins Buying Guide · Single fins and 2+1 basics · Ask the shop